Contact Safetyflex Truckstopper 5

Truckstopper 5 Removable Bollard from Safetyflex

Truckstopper 5 is a unique patent design from Safetyflex. Truckstopper 5 has been designed so that when a vehicle hits the posts, the spring post will flex and send the kinetic energy back to the vehicle and not into the foundation. The system is designed to follow the contours of the ground and can go round corners with no special parts needed.

Truckstopper 5

The post foundations are only 400mm deep and 1.2m wide. Successfully tested at MIRA to BSI PAS68:2010 stopping a 18 tonne - GVW truck at 50mph (80kph) at 90 degrees. After impact, if the bollard is damaged, it can easily be removed and replaced without having to replace the foundations. The the steel is good for 20 year wear, with the only need for re-painting or it can be fitted with mild or stainless steel shrouds.

Only requires a footing of 400mm...

PAS68 Vehicle Performance Classification

TRUCKSTOPPER 5 (BSI PAS68:2010) V/7500/N3/80/90:6.0/18.8
Vehice Test Weight Vehicle Class Vehicle Speed kph Vehicle Angle o Vehicle Penetration m 25KG+ Dispersion m Footing Depth mm
V/7500 KG N3 80 90 6.00 18.80 400

This Publicly Available Specification (PAS) has been prepared to address the needs of organizations who want assurance that vehicle security barriers will provide the level of impact resistance they are aiming for.

PAS68 identifies impact test methods, tolerances, test vehicle type and vehicle performance criteria that need to be met in order to conform to PAS68. It cites a classification system for the performance of vehicle security barriers and their supporting foundations when subjected to a single horizontal impact.

Want to find out more?

If you wish to find out more about the Truckstopper 5 then please complete our enquiry form, alternatively you can call us at +44 (0) 2476 662116 or email us on